PV Scientific Instruments |
About Crystal Radios
About Regenerative Receivers |
Single Triode Regenerative Radio Receiver |
This radio employs the most popular and successful regenerative radio circuit used by radio experimenters in the 1920s. A single-triode vacuum tube (01A, 37, or 76) is used as a very sensitive regenerative detector. This radio includes a set of plug-in tuning coils (550-1750kHz longwave and 29-47M shortwave), as well as sensitive antique headphones and required batteries. The set is constructed of the finest vintage fittings for that original 1920s look. It is easily operated from the front-panel controls, which include coarse- and fine-tuning dials, antenna-tuning dial, and regeneration control dial. Any early radio enthusiast will be extremely pleased with the wonderful operation of this radio receiver when used with a good (easy-to-construct) antenna and ground system.
Dimensions: Length: 20.5 cm, Width: 15.5 cm, Height: 13 cm (8" x 6" x 5")
Kit available for $175. Kit comes with wound oscillating coils and assembled front panels. You do all the wiring and finish the hardwood base. To build this kit, you will need a soldering gun, solder, sandpaper, and wood finish. You will need to read electronic schematic diagrams, follow instructions and picture diagrams to lay out parts, follow a vacuum tube pin layout, solder, apply power to a filament and a B supply in proper polarity, and make a simple wire antenna and ground arrangements. Building and operating instructions are included. To get answers to your questions or to place an order, please call us at 607-387-6752 or email us at pvsci@arcsandsparks.com. |
|
|
|
Crystal Radios |
Regenerative Radios |
Radio Kits |
Static Machines |
Induction Coils |
Vacuum Tubes |
Classic Reprints |
Tesla Reprints |
Used & Rare |